|
|
|
|
 |
|
Customer Information - new pricelist
(29.07.2010)
|
|
|
Dear customers,
We will change our sales prices from August, 1st to a new pricelist.
The first price adaption for almost three years at HAIMER is inevitable due to further increases in energy and raw material prices.
For your information the company HAIMER manufactures – and we will keep at that in the future – all products exclusively in its headquarters in Igenhausen to guarantee the well-known HAIMER quality. Despite the industry´s continuing trend to shift production to the East or Far East or to purchase some products from low cost producers the company HAIMER still trusts in its highly qualified and motivated staff. You can rely on HAIMER products to be “made by HAIMER” to 100 %! Thanks to strict quality controls and state-of-the-art production, HAIMER sets quality benchmarks for several years now according to the slogan “Quality Wins” and will not lose innovation force in the future by keeping the research & development rate at the high level of more than ten per cent of turnover.
We highly appreciate your confidence in our products and are of course looking forward to cooperate with you in the future.
We will send you the new pricelist automatically within a short time (if you are already a HAIMER customer). Please feel free to ask for a new pricelist by E-Mail: sales@haimer-asia.com
Yours sincerely,
Haimer GmbH
Your HAIMER sales team
|
|
HAIMER celebrates grand opening of HAIMER Shanghai office with its customers
(26.11.2009)
|
|
| |
After a short but very busy planning and construction time, the opening of the new HAIMER office in Shanghai could be celebrated. Especially in bad times like now for the entire metal working and engineering industry this is to consider an investment into the future.
To allow for the industrial growth in Greater Shanghai, HAIMER has now moved into its spacious office in the Chinese metropolis. For HAIMER Shanghai Trading it is now even better possible to take care of lots of customers in mainland China directly and uncomplicated with the well-known HAIMER service.
Many customers in China were invited to the grand office opening and thus a big celebration could take place under a Bavarian motto. The new office was designed HAIMER-like and is very similar to the Bavarian headquarters in Igenhausen.
Besides the workplaces on a space of 500 sqm a new showroom and training room has been installed and furnished, so that the approved HAIMER technology can be demonstrated and forwarded in a better way.
We wish the HAIMER Shanghai team good luck, success and all the best in the new office.
|
|
New license partners for HAIMER Safe Lock system
(16.07.2009)
|
|
Haimer, market leader for tool holding systems and balancing and shrinking technolgyis proud to announce that the cutting tools manufactured by Dauphin Precision Tool, LLC and Berkshire Precision Tool, LLC have become official “Safe-Lock” licensees. This licensing allows the companies to add the “Safe-Lock” modification to the shanks of their Brubaker, Data Flute, Fastcut and Weldon cutting tools if so desired by their customers.
“Safe-Lock” is a system that combines our specialized Haimer holder along with shank modifications to enhance tool holding stability and security. Our licensees can add a special set of grooves to the shank of cutting tools to prevent the tool from twisting out of the tool holder during extreme machining conditions. This modification on the cutting tool shank works in opposition to the direction of the cutting forces, enhancing the security of the tool holding. This shank modification, in conjunction with our “Safe-Lock” holder, allows our customers to use the most technologically advanced shrink fit systems with full confidence. Our system supports high metal removal rates, reduced scrap rates, promotes stability and reduces vibration.
Leading aerospace manufacturers in the United States have used “Safe-Lock”to triple their metal removal rates, dramatically improve their productivity and increase machining capacity without additional capital investment.
“With the substantial increase in machining speeds, increases in performance demanded by our customers and resultant increases in the cutting forces and stresses on our tools, the move to the Haimer Safe-Lock system is important for us. We appreciate the vote of confidence from Haimer in granting this license to our companies.” according to Cliff Flynn Director of R&D for Data Flute. Additionally, according to Cliff Hanner who oversees Engineering and R&D for Brubaker, Fastcut and Weldon, “We believe that it is also important for us to be able to offer the Haimer Safe-Lock option to our aerospace customers and others who use large diameter end mills, in carbide, powdered metal and cobalt. Advances in work materials must be met with advances in cutting tools and workholding. Given their reputation for outstanding quality combined with the innovation of the Safe-Lock system, Haimer was a superb choice for us.”
Haimer (inventor of the “Safe-Lock” system), holds tight requirements of potential licensee’s, and they have full confidence in the ability of Berkshire & Dauphin to provide their cutting tools with the “Safe-Lock” groove properly. “We are honored to have the Brubaker, Data Flute, Fastcut and Weldon brands as partners in our “Safe-Lock” system. Together, we can help our customers take their high performance machining to the next level”, announced Brendt Holden, President of Haimer USA.
For more information on the “Safe-Lock” program, please contact your local Haimer representative throughout the world.
For more information on Data Flute please contact Ryan Morin, Brand Manager at 800.447.1476. For more information on Brubaker, Fastcut and Weldon tools, please contact Dale Wert, Brand Manager at 800.522.8665. Alternatively, you can visit their website at www.talbotholdings.com.
Read the full version of the press release here , please.
|
|
HAIMER on Tour – with two brand new demo vans!
(08.07.2009)
|
|
| |
On-site solutions for the customer
From now on two brand new fully fledged demo vans move out to our national and international customers. Being directly with our customers, Haimer application engineers are capable to solve customers’ problems with exactly tailored solutions around the balancing and shrink fit technology on site at the customer’s facility.
The new VW Crafters are stuffed with the state of the art Haimer technologies. It is a show room on wheels for balancing and shrink fit technology of the latest generation.
In the next weeks and months Haimer is going to move out to customers in entire Europe calling back the importance of balancing. Haimer wants to stress the necessity of balancing bringing our balancing experts to your facility to provide the perfect solution for your (un)balance problems. Only using balanced tool holders you can really expect the full potential of your machining center and speed it up without any constraints!
We are looking forward to come and check the balance grade of your tools in use during our demonstration. We show you if you can really use the tools with the projected speed of your machine tool, without struggling with spindle and bearing problems in shortest time. This way also you can improve your production and move to highest process reliability and less downtimes.
The new mobile Haimer showrooms display nearly the entire Haimer product range. Apart from the Balancing Machine Tool Dynamic TD 2009 (with new user terminal “Tool Control” and new Balancing Software) and the shrink fit machine Haimer Power Clamp Comfort, we are showing our full portfolio of tool holding including the new high performance line “ Power Series”. Of course you can see also the world famous Haimer sensors in our demo van.
If you are interested in our demo van and want us to visit you please contact our Haimer sales team!
Haimer GmbH
Weiherstrasse 21
86568 Igenhausen
verkauf@haimer.de
www.haimer.de
|
|
BIG and HAIMER- strong partnership for the Japanese market
(10.10.2008)
|
|
| |
Haimer GmbH, Igenhausen, is proud to present BIG Daishowa Seiki Co Ltd. as distribution and system partner for shrink fit and balancing technology in Japan.
From now on, BIG Daishowa is marketing shrink fit machines specifically tailored to the Japanese market. As well BIG will promote Haimer Balancing Machines including accessories in Japan.
The cooperation will operate in the Japanese market under the name “BIG + Haimer”.
Haimer, German market leader in ultra-precise toolholders and internationally leading in machines for shrink fitting and balancing of tools, is convinced of having found the best partner with BIG Daishowa for the Japanese market.
The headquarters of BIG is located in Osaka, the main production facilities are situated on Awaji Island, which is an island in the Japanese Inland Sea. More than 600 people are employed currently at BIG Daishowa. Founded in 1967 the company is market leader in toolholding and accessories in its home market, BIG has an excellent reputation all over the world in the machining industry for its high precision and quality.
At JIMTOF 2008 BIG Daishowa will present a world premiere development: Haimer Power Clamp shrink fit machines Comfort and Preset, the first inductive high performance shrink fit machines running with the 200 V Japanese power network. Till now, an expensive and heavy transformer was necessary for such machines.
Furthermore BIG will promote Haimer balancing technology “Tool Dynamic” in the Japanese market. On the JIMTOF show a Tool Dynamic Comfort Plus Machine will be exhibited on the booth of BIG Daishowa. At Haimer’s booth the same machines will be shown under the new logo “BIG+Haimer”.
In the future BIG Daishowa takes care about the exclusive Japanese distribution of Haimer products and will present them in their showrooms all over Japan. The company also is taking care for the product support and customer service throughout Japan. Therefore Japanese customers will enjoy an excellent service which meets the high standards of BIG and Haimer.
|
|
|
|
|
| |
|
