|
|
|
|
 |
|
|
|
The
Universal 3D-Sensor is a very precise and versatile measuring instrument
for milling and EDM machines (insulated probe). It is an instrument that
no shop can do without. The 3D-Sensor is clamped into a tool holder and
inserted into a milling spindle. Once clamped into the machine spindle,
the run-out (T.I.R) is fully adjustable to zero. Then, you are able to find
exact positioning of the spindle axis on the edges of the workpiece. This
allows for zeros to be set and the length to be measured quickly and easily.
You may approach in any direction (X-, Y-, Z-axis – hence the name
“3D-Sensor”). When the dial gage shows zero, the spindle axis
is exactly on the workpiece edge. Only the Haimer 3D-Sensor allows for the
edge to be found on the first attempt. No calculating of the probe’s
ball diameter is necessary – just zero it out! Problems with mathematics
or calculations are eliminated, allowing for fewer operator errors. Our
3D-Sensor is quick and easy, reducing the non productive time, increasing
the productivity and accuracy of the operator.
Short and long probes are available. The sensor probes may be changed without
any tool. No re-calibration of the unit is needed after change of the probe.
Simply bring the needle to zero, and that is your edge with any probe. The
accuracy is such that you are able to inspect your parts right on the machine.
Tram vises, find the center of your bore, find your edge and inspect parts
– it is all possible with the Haimer 3D-Sensor, The unit has a large
overrun distance in connection with the fully tested preset breaking points
giving the sensor long life. All Universal 3D-Sensors are individually tested
and adjusted when being assembled in order to achieve a maximum of measuring
precision. |
Technical data subject to change without prior notice.
|
|
Technical
details |
|
|
|
|
|
|
Order
number |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Universal 3D-Sensor including short probe tip |
|
|
|
|
|
|
80.360.00 |
|
|
|
DXF
INFO
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shank |
|
|
Ø
20 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Accuracy |
|
|
0,01
mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lenght
without clamping shank |
|
|
113
mm |
|
|
|
|
|
|
|
|
|
|
|
|
Accessories |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Short
probe tip |
|
|
Ø
4 mm |
|
|
|
80.362.00 |
|
|
|
INFO
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Long
probe tip |
|
|
Ø
8 mm |
|
|
|
80.363.00 |
|
|
|
INFO
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
